Fixing a leaky faucet is a common household problem that can be solved with a few simple tools and steps. Here's how you can do it: ## Supplies Needed: * Wrench or pliers * Screwdriver * New washer or O-ring (depending on the type of faucet) * Pipe tape or thread sealant ## Steps to Fix a Leaky Faucet: ### 1. Turn Off the Water Supply Before starting any work on the faucet, turn off the water supply to the sink. This will prevent any accidental flooding while working on the faucet. ### 2. Remove the Handle Use a wrench or pliers to remove the handle of the faucet. Be careful not to damage the surrounding area while doing this. ### 3. Remove the Valve Stem Once the handle is removed, use a screwdriver to remove the valve stem from the faucet body. The valve stem is the long metal rod that goes into the faucet body. ### 4. Replace the Washer or O-ring The washer or O-ring is located at the bottom of the valve stem. If it is damaged or worn out, replace it with a new one. Make sure to choose the correct size and type for your faucet. ### 5. Reassemble the Faucet Once you have replaced the washer or O-ring, reassemble the faucet in reverse order of disassembly. Apply pipe tape or thread sealant to the threads before tightening them to prevent leaks. ### 6. Test the Faucet Turn on the water supply and test the faucet to make sure it is no longer leaking. If it is still leaking, check to see if all connections are tight and if there are any other issues with the faucet.