How to wash white sneakers
Now everyone will have one or two pairs of white ball shoes at home. They are beautiful and comfortable in summer and are very suitable for sports. If the white ball shoes are dirty, how can they be washed as clean and white as when they were just bought back? Have you also encountered the situation that yellow water stains are always left on the white ball shoes no matter how they are washed?
The first step is to brush the sole. First, brush the dirtiest place with a brush, that is, the sole of the shoe. Brush the soles of sneakers with a hard brush, brush soap or washing powder on the brush, and clean the dirt. If there are stones or sand in the tread, please use a small screwdriver to buckle it out and brush the inside of the texture.
The second step is to brush the inside of the shoes. The inside of shoes is the easiest to forget to brush. In fact, sweat stains are easy to accumulate inside sports shoes, so they also need to be cleaned. Put a small brush into the inside of the shoe, brush the top and bottom, and then rinse with clean water.
Step 3: brush the upper. Shoe uppers have different materials, and different materials have different cleaning methods. Wash the small part of the toothbrush with clean water. If it's not clean, you can use some detergent and remember to brush it in one direction, otherwise the mesh is easy to bristle. The part of the cloth can be washed directly with water, and it can be brushed clean with some detergent.
Step 4: wrap this one in toilet paper. This is the most important step in cleaning white ball shoes. Take the toilet paper and wrap all the cleaned white ball shoes with toilet paper. According to the shape of the white ball shoes, stick the toilet paper close to it without leaving a gap.
Step 5: air drying. Put the white ball shoes wrapped with toilet paper in a ventilated and cool place to dry. Remember, don't put it in the sun. Whitening the sneakers is easy to aging the material of the sneakers and reduce its service life.
After solving how to clean the white edge of sports shoes, that is, after cleaning, it will still get dirty in the future. So how to maintain it? You can wax the white edge. Because if the wax is applied, it can play a good protective role. A lot of dirty things may not come in, and it can prevent cleaning the white edge in a short time. One purpose of waxing is to maintain the white edge and prevent it from getting dirty in a short time. Another important purpose is to prevent scratches and other situations. Because a layer of wax naturally plays a very good protective role.
How to wash mesh sneakers
For the mesh surface, since most of the common PV mesh surface, you can use an old toothbrush to dip water and brush it from the inside to the outside. For example, if the mesh surface is in front of the shoe, you should brush it from the vamp to the toe of the shoe. Only in this way can dirty things still remain on the shoe. It is best to brush gently with a soft toothbrush dipped in soapy water, then brush off the dirt with a toothbrush dipped in water or a small amount of toothpaste, and finally wrap it with white toilet paper.
After wiping and wrapping, do not put it where the sun can directly expose it, so as not to turn the white part of the shoes yellow. It should be placed in a cool and ventilated place. If there is still a little sunshine in the place, you can completely wet the tissue paper, cover all the shoes and put them flat, so that there will be no yellowing.