Blue screen is one of our common computer failures. There are many reasons. What are the specific solutions? The following is the solution to the sudden blue screen of the computer I sorted out for you. I hope it will be useful to you!
Solution to sudden blue screen of computer
Blue screen solution 1: the computer blue screen is caused by poor memory module contact or memory damage
In the actual work, the most common computer blue screen phenomenon encountered by the author is the poor contact of memory modules (mainly caused by too much dust inside the computer, which often occurs in old computers) and the majority of computer blue screens caused by hard disk failure. Of course, there will also be computer blue screen phenomenon in case of computer memory module failure.
Solution:
Since most of the blue screen faults caused by memory are caused by too much internal dust or poor contact, the solution is also very simple. You only need to open the computer chassis, pull out the memory module, clean the socket and wipe the golden fingers of the memory module, and then replace it. General problems can be solved. If the problem is not solved, it is determined that it is a memory fault, and the problem can be solved by replacing the memory module.
Blue screen solution 2: computer blue screen caused by hard disk failure
Problems with the hard disk often lead to the blue screen of the computer. For example, the hard disk has a bad track, and the computer reading data error leads to the blue screen phenomenon, because the hard disk, like the memory, carries the access operation of some data. If there is a bad track in the area where the system files are accessed / read, the system will not operate normally, resulting in system crash and computer blue screen.
Solution:
Detect the bad track of the hard disk. If there are a large number of bad tracks in the hard disk, it is recommended to back up the data and replace the hard disk. If it is less bad, it is recommended to back up the data and reformat the partition disk. Friends who understand the computer hard disk can also isolate the bad hard disk area. Then reinstall the system to solve the problem.
Blue screen solution 3: computer overclocking causes computer blue screen
The causes of blue screen phenomenon can be explained from two aspects: soft and hard. In terms of hardware, overclocking is a major cause of blue screen. Excessive overclocking. Due to overload operation, there are too many internal operations, which overheats the CPU, resulting in system operation errors. If you want to overclock and don't want to have a blue screen, you have to take heat dissipation measures. It will be much better to change a powerful fan and add some heat dissipation materials such as silica gel. In addition, an appropriate amount of overclocking or no overclocking at all is also one of the solutions. Whether you want stability or higher speed depends on your choice. However, for most friends, overclocking operation is generally not carried out, so this is not practical for most friends.
Blue screen solution 4: the installed software does not exist, which also leads to the blue screen of the computer
However, this kind of software is not compatible with most computers one day after the software is installed frequently, and most computers are not compatible with this kind of software.
Solution:
If you are sure that the computer is well used before the start, and there are often computer blue screen failures after installing a software, you can uninstall the later installed software to try. If the problem is solved, the computer blue screen is generally caused by software incompatibility. If the problem is not solved, it may be caused by other reasons.
Related reading: computer common fault analysis skills
1. Generally, more than 80% of computer system faults are software faults. At the same time, most software faults are relatively easy to deal with, while most hardware faults are caused by peripherals. Therefore, the analysis and fault finding should be carried out in the order of "software before hardware, external before internal".
2. Common software faults.
A. error prompt: in case of software failure, many errors can be captured by the application software or operating system and give corresponding prompts. Such failures are generally caused by software defects, software conflicts, improper configuration or wrong operation.
B. application software fails to start normally: such failures are generally caused by software conflict, wrong operation, improper configuration or virus.
3. Handling methods of common software faults.
A. use anti-virus software: in case of inexplicable slow down or error of the system or application, scan the whole system with anti-virus software to determine whether the system is poisoned.
B. single application system failure: for single application system failure, the application is generally reinstalled. If you are familiar with the system, you can check the system configuration first and then decide whether to reinstall the system
4. Causes and treatment methods of common hardware faults.
The causes of computer hardware failure are mainly related to the use environment, users' operation habits, natural aging of hardware and poor quality of hardware products. Under normal circumstances, the hardware failure of the system can be eliminated as long as the faulty hardware equipment is found and replaced.
5. When the computer system has a fault, first confirm the fault phenomenon through observation and inspection, then analyze the fault phenomenon, judge the possible cause of the fault of the computer system according to the corresponding relationship between these fault phenomena and possible causes, and then use the troubleshooting method to eliminate the impossible fault causes, so as to gradually determine the fault causes. When the fault causes are determined, Then start the maintenance.
6. The above contents involve relevant computer knowledge. If non professionals suggest to find enough experience before actual operation, some complex computer faults need to be repaired by professional maintenance points and professional maintenance personnel.