In life, I often encounter a newly bought ball point pen that can't write. Is there any good way to make the ballpoint pen write more smoothly? Join us on this website.
A way to make the ballpoint pen write more smoothly
1. We can solve the problem that the ballpoint pen doesn't write smoothly once and for all by doing a little on the ballpoint pen core.
2. Find a thicker needle or pin, and pierce a small hole about 1 cm above the oil level between the ball point pen core and the pen core. If the writing is not smooth, the ball point pen core can work again and play a role.
Use common sense
1. The pen is stronger and more durable than ordinary pens, but if it is used and kept improperly, it often can't write words. This is mainly because the dry ink oil is bonded around the steel ball to prevent the ink from flowing out. Ink is a kind of viscous oil, which is made from flaxseed oil, synthetic pine nut oil (mainly containing terpene alcohols), mineral oil (oil obtained by fractionating petroleum and other minerals), hard glue and lampblack.
2. When using the ball point pen, do not write on the paper with oil and wax, otherwise the oil and wax are embedded in the copper bowl along the steel ball to affect the ink and cannot write words. Also avoid the impact and exposure of the pen. When not in use, use the pen cap with gloves to prevent damaging the pen head, deformation of the pen holder and oil leakage of the pen core from polluting objects. In case of cold weather or unused for a long time. When the pen does not produce oil, soak the pen head in warm water for a moment, and then stroke the pen tip on the paper to write words.
3. The ballpoint pen has one big disadvantage: the handwriting it writes is very clear at first; But it can't stand the test of time. Over time, the handwriting will slowly blur. This is because the ink of ballpoint pen is made of dye and castor oil. Oil is different from water. It is not easy to dry. Over time, the oil will slowly soak away on the paper and the handwriting will become blurred. Therefore, the ball point pen can only be used as an ordinary writing pen. If you want to keep your handwriting for a long time, you need to use a pen.
4. If the ball point pen touches the ground at 90 degrees, the head of the ball point pen will not be damaged. However, if the closing part is bruised, there will be "oil leakage" at this gap. In serious cases, the ball will fall off and have difficulty in writing.
Use attention
The angle is too small
The closing part of the ball socket that is easy to wear (the material of the ball socket is nickel platinum copper or stainless steel, which is much easier to wear than the ball bead). If it contacts the written object for a long time, even if the written object is paper, the ball socket can not withstand wear, which will cause the ball bead to fall off.
Correct angle
When writing with a ballpoint pen, it is ideal to control the angle between 55 ° and 70 °. At this time, only the ball ball contact with the paper (the ball is very hard, tungsten carbide or ceramic, which is not easy to wear), and the closing part does not contact the writing object, so as to ensure that the ballpoint pen can prolong its service life in a good writing state.
The padding paper is too thick
When writing, the pad paper is too thick, and the closing part of the pen head contacts the paper, which is easy to wear and tear off beads. It is suggested that 0.4 ball beads cannot be copied; The ball bead of 0.5 can be copied up to 1, and no more; The maximum number of 0.7 ball beads is 3 to 4, which should not be more. It is best to write at 75 °.
Purchase points
1. The high-grade ball point pen has obvious trademark and model marks on the pen cover, and obvious brand, production date and "Da" mark at the tail of the refill ("Da" mark is the combination of the first letter of Chinese Pinyin of the two characters of Archives).
2. The refill of metal oil pipe must be used. The ball bead of the pen head must be made of cemented carbide tungsten ball bead, and the writing performance is better than that of ordinary ball point pen. The ink filled in the refill must be 424 pure blue ink and 322 black ink produced at a fixed point. These two inks have the advantages of sun resistance, water resistance and impermeability. The oil pipe can be filled with yellow ink, but the oil pipe can be filled with plastic ink.
3. On the package of goods, there are signs and marks such as trademark, model, manufacturer's name, place of origin and quality inspection certificate. Counterfeit and shoddy goods. The ink filled in the refill is not the archival ink recognized by the state archives administration. There is no "Da" mark on the refill, nor is there trademark, model, factory name and place of origin. Some of them use unlicensed refills smuggled in from abroad and pretend to be imported high-grade round ball pens after assembly.
How to wash the ball point pen oil on the clothes
1. White vinegar cleaning method
Soak the contaminated area with shampoo, and then gently scrub it with a brush dipped in white vinegar.
2. Wash with alcohol and soap
Brush with a small brush stained with alcohol. After the stain dissolves and spreads, soak the clothes in cold water and wash with soap.
3. Wash with toothpaste and a small amount of soap
First wet the stained place with cold water, then apply some toothpaste, wipe a small amount of soap and gently rub it.
4. Wash with milk
Boil the milk, put a towel under the clothes, dip a ball of cotton in hot milk and wipe the oil stain until the oil stain disappears.
5. Other chemical methods
In fact, there are some chemical methods to remove the ball point pen oil from clothes, such as gently wiping with benzene, carbon tetrachloride or acetone, but these things are difficult to find. Therefore, the methods that Xiaobian teaches you are easy to operate, hoping to bring some convenience to your life.