Sometimes the system fails and the computer cannot be used normally. We can choose to restore the system. Many people will call professionals to do it. In fact, it is not difficult. We can do it ourselves. The following is the method of restoring the computer system I sorted out for you. I hope it is useful to you!
Method for restoring computer system
1. Check whether the hidden partition exists. The one click restore function is based on the hidden partition. The computer will bring a hidden partition of the system. If the partition is deleted, the one click restore function will not be used.
2. Check whether the one click restore software works normally. Find the one click restore software and double-click to see if it works normally. If the one click restore software doesn't work, you can download the latest version from the official website.
3. Back up the computer system. If we want to use the one click restore function, we must first have a backup system, otherwise we have nothing to restore or can only restore the factory system.
4. Close all running applications. Try not to operate the computer during the backup process. Too many processes will make the computer backup very slow and prone to errors, resulting in the failure of system restoration.
5. After entering the one click restore interface, we need to choose backup. Different software has different ways. Some software can backup on CD or USB flash disk. Just choose by yourself.
6. The path should be selected, not put at will. There should be a special location, and it is best not to have Chinese. There are two ways to turn on one click restore. One is that the computer can be turned on normally and can be restored after turning on.
However, it will appear in the process of automatic restoration during shutdown. The other is that the computer cannot start normally. If we want to restore with one click, we just need to press the restore key directly to enter the restore interface.
8. If you have backed up the system for many times, you can choose the one you want to restore. Multiple backups of the system will not increase the memory space occupied by backups. You can rest assured that each backup of the system will overwrite the original files, but a point in time will be reserved for us to restore.
9. Wait for the restore to complete and restart the computer. The restore process takes about 20 minutes, depending on the size of the system. If you want to restore to the factory, you can select the first original backup. Do not force shutdown during restore, otherwise the computer will be difficult to recover.
Related reading: computer common fault analysis skills
1. Generally, more than 80% of computer system faults are software faults. At the same time, most software faults are relatively easy to deal with, while most hardware faults are caused by peripherals. Therefore, the analysis and fault finding should be carried out in the order of "software before hardware, external before internal".
2. Common software faults.
A. error prompt: in case of software failure, many errors can be captured by the application software or operating system and give corresponding prompts. Such failures are generally caused by software defects, software conflicts, improper configuration or wrong operation.
B. application software fails to start normally: such failures are generally caused by software conflict, wrong operation, improper configuration or virus.
3. Handling methods of common software faults.
A. use anti-virus software: in case of inexplicable slow down or error of the system or application, scan the whole system with anti-virus software to determine whether the system is poisoned.
B. single application system failure: for single application system failure, the application is generally reinstalled. If you are familiar with the system, you can check the system configuration first and then decide whether to reinstall the system
4. Causes and treatment methods of common hardware faults.
The causes of computer hardware failure are mainly related to the use environment, users' operation habits, natural aging of hardware and poor quality of hardware products. Under normal circumstances, the hardware failure of the system can be eliminated as long as the faulty hardware equipment is found and replaced.
5. When the computer system has a fault, first confirm the fault phenomenon through observation and inspection, then analyze the fault phenomenon, judge the possible cause of the fault of the computer system according to the corresponding relationship between these fault phenomena and possible causes, and then use the troubleshooting method to eliminate the impossible fault causes, so as to gradually determine the fault causes. When the fault causes are determined, Then start the maintenance.
6. The above contents involve relevant computer knowledge. If non professionals suggest to find enough experience before actual operation, some complex computer faults need to be repaired by professional maintenance points and professional maintenance personnel.