Treadmill exercise has many advantages, but treadmill will also have some common faults. We need to understand the solutions. The following is the common fault causes and solutions of the treadmill I sorted out, which I share with you!
The electric treadmill cannot accelerate
Possible causes: 1. The instrument panel is damaged; 2. The sensor is broken; 3. The drive plate is broken.
Solution: 1. Replace the instrument panel; 2. Replace the sensor; 3. Replace the drive plate.
The running belt of the treadmill slips
1. Possible reasons: too loose belt; 2. The multi groove belt of the treadmill is too loose.
Solution: 1. Adjust the balance bolt at the rear end of the running belt (rotate clockwise until it is reasonable); 2. Adjust the fixed position of the motor.
The treadmill stops automatically
Solution: 1. Please check the line carefully; 2. Check the cable arrangement; 3. Replace the drive plate.
Possible causes: 1. Line short circuit; 2. Internal wiring problems; 3. There is a problem with the drive board.
Noise during exercise
Possible causes: 1. The space between the cover and the running belt is too small, resulting in friction between the cover and the running belt; 2. It may be due to foreign matters rolled in between the running belt and the running board during exercise; 3. The running belt deviates seriously and rubs with both sides of the running board; 4. Motor noise
Solution: 1. Correct or replace the machine cover; 2. Remove foreign matters; 3. Adjust the running belt to balance; 4. Replace the motor.
Why can't the treadmill start
Possible causes: 1. Power failure; 2. Fuse blown; 3. The switch of the electric treadmill is broken; 4. For other reasons, please contact our professionals.
Solution: 1. Please check the power supply; 2. Replace the fuse; 3. Replace the power switch.
The running belt of the treadmill deviates from the belt
Possible causes: 1. Imbalance between the front and rear axles of the treadmill; 2. Because the running posture in sports is not very standard, the force of left and right feet is uneven, resulting in belt deviation.
Solution: adjust the balance of the roller.
The motor makes noise when the electric treadmill is moving
Possible causes: 1. The carbon brush may be seriously worn; 2. When the motor is running, it rubs against nearby objects. Solution: 1. Check or replace the carbon brush; 2. Remove foreign matters.
Turn on the power and turn on the power switch. The power indicator does not light up. Possible reasons: 1. The three-phase plug is not inserted in place; 2. The wiring inside the switch is loose; 3. The three-phase plug is damaged; 4. The switch may be damaged;
Solution: 1. Try several times; 2. Open the upper shield and check whether the wiring is loose; 3. Replace the three-phase plug; 4. Replace the switch.
Key failure
Possible causes: 1. Key aging; 2. The key circuit board becomes loose;
Solution: 1. Replace the key; 2. Lock the key circuit board.
Incomplete display
Possible causes: 1. Poor contact of LCD; 2. Long time aging of LCD;
Solution: 1. Lock the fixing screw of the circuit board; 2. Replace the electronic watch.
The display flashes
Possible causes: 1. Poor contact of control line; 2. Electrostatic interference;
Solution: 1. Connect the control line; 2. The grounding wire is not connected properly.
Running doesn't feel smooth
Possible causes: 1. Check whether the running belt is too loose; 2. Check whether the multi groove belt is too loose;
Solution: 1. It needs to be adjusted according to the instructions of the manual; 2. Adjust the speed to the minimum, step on the running belt with your foot, observe the tightness of the multi groove belt, and adjust the front drum; 3. Add lubricant to the running board to lubricate the running board.
After using it for a period of time, I feel the vibration is getting bigger and bigger
Possible causes: 1. Check the groove of multi groove belt; 2. Check whether the vibration is generated by the motor; 3. Check whether the front and rear drum wheels rotate abnormally;
Solution: 1. Remove the ditch debris; 2. Replacement required; 3. Replace the drum.
After using for a period of time, abnormal sound occurs
Possible causes: 1. Check whether the front and rear rollers are damaged; 2. Check whether the motor carbon brush is worn unevenly; 3. Check whether the fixing screws of the protective cover are loose; 4. The pulley touches the speed sensor; 5. Foreign bodies run into the inner layer of the running belt;
Solution: 1. Replace the roller; 2. Replace the carbon brush; 3. Tighten the fixing screws; 4. Adjust the speed sensor to the appropriate position; 5. Remove foreign matters.
The machine produces peculiar smell or smoke
Possible causes: 1. Open the protective cover and check whether each connecting wire is short circuited; 2. Check whether the current continuously exceeds the rated value after the motor is loaded;
Solution: 1. Replace the wiring; 2. If the current exceeds the rated value, replace the motor; 3. Regularly add lubricating oil to the running board to lubricate the running board (at least every month), and once every seven days at home.
No action of electronic watch key
Possible causes: 1. Check whether the safety switch pops open and is not on the electronic watch; 2. The connecting cable is not connected properly;
Solution: 1. Press down the safety switch; 2. Connect the cable; 3. Replace the electronic watch.
Unable to accelerate or decelerate
Possible causes: 1. Check whether the connector of connecting cable is in poor contact; 2. Check whether the key layout cable inside the electronic watch is broken, broken or falling off; 3. Poor electronic watch; 4. Poor motor control board;
Solution: 1. Replace the wiring; 2. Replace the electronic meter; 3. Replace the control panel.
Electronic watch key failure
Possible causes: 1. Check whether the key cable inside the electronic watch is broken, broken or falls off, or the floor of the key electronic watch is not locked;
Solution: 1. Open the electronic watch and lock the fixing screw of the key electronic board; 2. Replace the electronic watch.
Treadmill exercise is very good for human body. Firstly, avoid inhaling dust and some pollutants in the air during exercise, which is better than running outdoors. At the same time, treadmill can also set different running speed according to everyone's different physique, which can be adjusted according to their own physical state, so as to better exercise and improve physical immunity, The most important thing is that the exercise of treadmill is more convenient. As long as you are free, you can run at any time.
Before using the treadmill, you should do a good warm-up exercise first, and then gradually increase the intensity, otherwise it is likely to cause the strain of thigh and calf muscles. If there is a certain damage to the joints, it is generally about 15 minutes. When getting off the plane, you should also slow down slowly, otherwise you are likely to be dizzy and faint. When running, you should also pay attention to adjusting the speed according to your own situation. Otherwise, you may not keep up with the rhythm and fall. The exercise time is about 40 minutes. Otherwise, you may cause sports injury. You should pay attention to adjusting your breathing.