The computer browser inputs the 192 website and wants to set up the router, but finds that it can't be opened. What should I do? Below, I sorted out the relevant methods for you that the computer browser can't open the 192 router website. I hope it will be helpful to you!
1. Connect the router to the computer.
When setting up a wireless or wired router for the first time, you must plug the network cable into one of the computers, and make sure that your network cable has been plugged in. The network cable connecting the wireless router to the computer cannot be plugged into the WLAN port (blue), but into one of the yellow ports such as 1 / 2 / 3 / 4.
2. Set to obtain IP automatically.
Win7 sets the automatic IP acquisition method:
Right click "network" on the desktop and select "change adapter settings". (if "network" cannot be found on the desktop, click the start menu, select "control panel", select "network and Internet", select "network and sharing center, and select" change adapter settings ") to find" local connection ", right-click and select" properties ". In the following item box for network connection, double-click" Intel protocol version 4 (TCP / IPv4) ", Select "automatically obtain IP address" and "automatically obtain DNS server address" in the pop-up window. Confirm and take effect in a moment. As shown below:
XP set automatic IP acquisition method:
Right click the "network neighborhood" on the desktop and select "change adapter settings" (if the "network neighborhood" cannot be found on the desktop, click the start menu, select "control panel", select "network and Internet connection", and select "network connection") to find the "local connection", right-click and select "properties", and in the following item box for network connection, double-click "TCP / IP Protocol"), Select "automatically obtain IP address" and "automatically obtain DNS server address" in the pop-up window. Confirm and take effect in a moment.
Generally, the instructions in the router will explain whether the first step in setting the router is to enter 192.168.1.1 or something else. Some are to enter 192.168.1.253 or something else. The following figure shows the setting of. 253!!
2 if there is no manual and you don't know what address to enter, you can try to set the IP to automatic acquisition, then left click the local connection, click support on the tab, and enter the default gateway address in the browser.
3 when I set up a wireless router, I also encountered that the IP address given in the input manual could not be opened. Then I tried to open it with the mobile browser. Later, I still set it with the mobile phone. (I also made a mistake. I don't know why. Children's shoes with smart phones can try my mobile phone). The following figure is a screenshot of the address set by my mobile phone access router!
4 if the above method is not available, we can follow the following steps: click start run, enter CMD, and then click Ping 192.168.1.1. If the prompt in the figure below appears, there is no Ping. In the following figure, there are request time out, sent and lost. Sent means you send data, lost means you lose data, and at least lost is less than sent,
5 if you can't Ping as shown in the figure above, we need to check the IP settings. Setting method: right click my network neighborhood - properties - right click local connection - properties - and then select "Internet Protocol (TCP / IP)" - click "properties"! Then enter 192.168.1 in the IP address field X (x can be any number from 2 to 254), then click on the subnet mask and it will be filled in automatically, and then fill in 192.168.1.1 on the default gateway. Now confirm it!