The slide rail, also known as the guide rail and slide way, refers to the hardware connecting parts fixed on the cabinet body of furniture for the access and movement of the drawer or cabinet board of furniture. The slide rail is suitable for the connection of wooden and steel drawers of furniture such as cabinet, furniture, document cabinet and bathroom cabinet. Now let me tell you how to remove the slide of computer desk drawer. Welcome to read it!
First of all, if I want to know how to remove the slide rail of the household drawer, I need to know how to install the slide rail of the drawer. The drawer is generally composed of five boards, including a drawer panel, one left and right side plates, one back plate and one thin plate. The plastic accessories with white on the board are generally fully configured. When installing, just screw the black screws directly. Please understand all kinds of drawer accessories in person.
Next, let's take a look at the second step of how to remove the drawer slide and what to do. How to install the drawer slide? First of all, we should know that when installing drawers, those with I plugs on the board need to be tightened one by one, then screw in the long black screws, and smash the white soft turnbuckle into the corresponding air of the board. Among the white turnbuckle, find the corresponding board, smoke control and black screws according to the label, and insert them. The black screws enter the competition hole, and the small hole corresponds to a slightly larger round hole.
Our drawer panels are generally equipped with card slots, and there are two small holes in the middle for the installation of handles. Here, we should pay attention to some problems. The first is that the installation tools should be complete, and the slotted and cross screwdriver are indispensable. Secondly, after the installation is completed, the stains on the toilet surface should be cleaned with water with a rag. The poisoned oily stains can be stained with some alcohol or detergent. How to remove the larger drawer slide rail, This is best done by two people.
You should know the internal structure of the drawer. I believe you also know where our drawer slide rail should be. The slide rail is on both sides of the left and right side plates of the drawer. First, install screws on the part of the drawer floor, transfer the slide rail to both sides of the drawer side plate, push the black circlip upward, pull out the slide rail. The lower part of the slide rail is flat, the lower part of the drawer board is flat, and the front of the drawer side plate should be distinguished, How to disassemble the drawer slide rail? The method is the same!
How do I remove the drawer slide? The two large side plates of the cabinet body first screw black screws into the white plastic holes on the board, and then install the removed wide rails, which are fixed with sharp small screws. One slide rail is fixed on the cabinet body with two small screws, one before and one after. The slide rails on both sides of the cabinet body are installed in this way. If you want to remove them, just reverse them in the same way.
Summary
Today, we have finished the installation and disassembly of drawer slide rail. Have you learned it?