How does the computer crack the WiFi password? Wi Fi is a technology that can connect personal computers, handheld devices (such as pads, mobile phones) and other terminals to each other wirelessly. In fact, it is a high-frequency radio signal. Now let me tell you how the computer can crack the WiFi password. Welcome to read it!
How does the computer crack the WiFi password
1. Cdlinux USB flash disk startup
1 open unetbootin and use it to install cdlinux on USB flash disk. Set it as follows:
2. Choose backtrack for the release version, which is suitable for our cdlinux operating environment. Then choose the downloaded cdlinux image, and finally choose our USB flash drive letter. Remember not to choose the wrong one! Click OK and the program starts to be made. These are automatic. All we have to do is wait!
3. After the production is completed, you will be prompted to restart. Here we click exit. Do not restart temporarily.
2. Set the BIOS startup mode to start with USB flash disk
According to different computers, this step is not the same. You can baidu how to start your own computer with USB flash disk. After starting, enter this interface as shown in the figure below, select the language interface in a stop interface, and select the Chinese interface
3. Enter cdlinux operation
After entering, the following desktop will appear. Do you see the program named "minidwep GTK" and double-click to open it
A prompt window will pop up each time:
As we all know, the above instructions should not be used for illegal purposes.. The main interface of the tool is described in detail below (as shown in the figure):
1) wireless network card wlan0. The information of your wireless network card is displayed here. 2) Channel, encryption mode. All channels are selected by default. There are two encryption methods: WEP and WPA / WPA2. Choose the default in the following way. 3) Displays the MAC address, name, strength, channel, encryption method, etc. of the route. 4) This vertical bar is a function button. Click to realize relevant functions. 5) Here, the progress of relevant status is displayed during scanning.
After seeing the interface, directly click the scan button in Figure 4 above to see the progress bar in the middle. After a moment, you can see the Mac, name, strength, channel, encryption method, etc. of the route. Here, take WPA / WPA2 as an example, and we'll talk about WEP later (because it's easier to break).
Click the name of the route we need to crack, click the start on the right, and the decentralization will carry out the "handshake" operation, and constantly connect with the route. This process is automatic, depending on the absolute time of route and signal correlation strength.
When the "handshake" is successful, you will be prompted. Seeing the figure below shows that we are further away from success.
Wait a little longer and you will be prompted to get the handshake package. Ask if we choose a dictionary to search for passwords, click "yes" and then click "OK".
Select "wordlist. TXT" in the pop-up window, which is attached to this image. Select and click "OK" in the lower right corner. Then comes the password cracking process. It depends on luck and dictionary strength. Someone once shared a 3G size password package. According to this speed, a meal can almost produce results, if it's not a special BT password! The process of running the dictionary is shown in the following figure
When the software automatically scans the password, it will pop up automatically. The crack is successful. Here is the account password. Ha ha, is there a sense of achievement