All in one machine is a practical computer. It is more convenient to carry than desktop computers, and its performance is better than notebook computers, which makes many people who buy computers turn their attention to this cost-effective computer. Now let me tell you about the disassembly steps of the all-in-one computer. Welcome to read it!
This is a close-up of the back of the machine. The key to dismantling this machine is this picture. This machine is designed without screws. Except for two fixing brackets, the rest are all snaps. The place in the red circle is the seal. I was inspired by this sign when I opened this machine. Because this sign is a necessary place to dismantle the machine.
After the two screws are lifted, you can see the fixing bracket. The bracket can be removed by screwing it off. The next step is how to take the machine apart.
This is a close-up after removing the bracket. I took a detour when I first started to dismantle it. I thought it was like dismantling the monitor from around, but later I found it couldn't be dismantled at all. It can be seen from the figure that the rear cover is not integrated, which is why the sealing label pastes both sides of ab. Push the two sides of AB to the left and right respectively. You can take off the AB cover.
That's how the back cover looks when it's taken off, and then you start with the screws around it.
This is what it looks like after taking off the second rear plastic cover. Now you can remove the hard disk. There are two screws on it. After you remove it, you can take off the hard disk. Note that when taking the hard disk, measure and push it to the left without up and down force. To avoid damaging the interface. You cannot remove the optical drive now. Then you can remove the metal cover. Also unscrew the upper screw.
Now this machine is basically naked. Let's take a look at the picture of optical drive
It can be seen that except for the hard disk, the notebook design is basically adopted.
Dual fan cooling is adopted.
The three screws in the figure above tell you that it is impossible to dismantle the machine from all around.
The removed edge strip is not difficult next. Look at the power supply of this machine. The quality is good.
Disassembly completed