During the process of using the computer, it automatically restarts inexplicably and can't work at all. How to solve the problem of continuous restart? Here are the reasons and solutions for the automatic restart of the computer I sorted out for you. I hope it will be useful to you!
Why does the computer always restart automatically
1. It may be caused by hardware problems, such as unstable heat dissipation of memory, loose graphics card and network card. If this is the case, repair it appropriately.
2. Caused by the problem of virus Trojan horse, some spoof viruses will prompt the system to start automatically in 60 seconds. Or a hacker backdoor program can remotely control all activities of your computer, including restarting your computer.
3. Caused by some setting problems, such as Windows XP. By default, the system will automatically restart when there is an error. In this way, when the user shuts down, if there is an error in the system during the shutdown, the computer will be restarted.
4. Now USB devices are common, such as USB flash disk, mouse, keyboard, modem, etc. These USB devices are also easy to cause shutdown failure. When a shutdown turns into a restart failure, if a USB device is connected to the computer, unplug it first and then turn it off.
Solution to automatic restart of computer all the time
1. First check whether the computer automatically restarts due to a hardware problem. If you don't understand the hardware equipment, it is recommended that you take it to a professional computer maintenance point for maintenance and inspection. You'd better not disassemble it.
2. Check whether the computer is infected with a virus. You can use 360 anti-virus software to check and kill the virus and Trojan horse. 360 anti-virus software can not only check and kill the Trojan horse, but also repair the system.
3. Turn off the automatic restart function, right-click "my computer" on the desktop, select "properties" in the pop-up right-click menu, pop up the "system properties" window, and click the "advanced" tab.
4. Click the "setting" button in the "startup and fault recovery" column, remove the check mark in front of the "automatic restart" option in the "system failure" column, and click the "OK" button to check whether automatic restart will occur again.
5. Turn off advanced power management, click "start → settings → control panel → performance and maintenance → Power Options", and in the pop-up window, enable or cancel "advanced power support" as needed.
6. If you use "advanced power support" when the fault occurs, try to cancel it. If you use "advanced power support" when the fault occurs, try to enable it.
7. Check whether your startup items are abnormal, because there are bugs in some startup items, which will also lead to the automatic restart of the computer. It is recommended to use the system optimization function of 360 anti-virus software to help you analyze which programs do not need to be started.
Related reading: computer common fault analysis skills
1. Generally, more than 80% of computer system faults are software faults. At the same time, most software faults are relatively easy to deal with, while most hardware faults are caused by peripherals. Therefore, the analysis and fault finding should be carried out in the order of "software before hardware, external before internal".
2. Common software faults.
A. error prompt: in case of software failure, many errors can be captured by the application software or operating system and give corresponding prompts. Such failures are generally caused by software defects, software conflicts, improper configuration or wrong operation.
B. application software fails to start normally: such failures are generally caused by software conflict, wrong operation, improper configuration or virus.
3. Handling methods of common software faults.
A. use anti-virus software: in case of inexplicable slow down or error of the system or application, scan the whole system with anti-virus software to determine whether the system is poisoned.
B. single application system failure: for single application system failure, the application is generally reinstalled. If you are familiar with the system, you can check the system configuration first and then decide whether to reinstall the system
4. Causes and treatment methods of common hardware faults.
The causes of computer hardware failure are mainly related to the use environment, users' operation habits, natural aging of hardware and poor quality of hardware products. Under normal circumstances, the hardware failure of the system can be eliminated as long as the faulty hardware equipment is found and replaced.
5. When the computer system has a fault, first confirm the fault phenomenon through observation and inspection, then analyze the fault phenomenon, judge the possible cause of the fault of the computer system according to the corresponding relationship between these fault phenomena and possible causes, and then use the troubleshooting method to eliminate the impossible fault causes, so as to gradually determine the fault causes. When the fault causes are determined, Then start the maintenance.
6. The above contents involve relevant computer knowledge. If non professionals suggest to find enough experience before actual operation, some complex computer faults need to be repaired by professional maintenance points and professional maintenance personnel.