Recently, some netizens reported that the local disk icon is very strange and feels like poisoning. To solve this problem, let me tell you how to solve the abnormal display of computer local disk icon. Thank you for coming to read!
Solution to abnormal display of computer local disk Icon
1. Right click my computer and select "management";
2. Select "disk management" in the directory on the left, and all local storage devices will be displayed on the right;
3. Select the local disk with abnormal icon, such as "disk J", right-click this item and select "change drive name or path";
4. Select "change" in the following three buttons;
5. Click and select "assign the following drive letter", directly open the drop-down menu on the right, select a drive letter that is not used, such as "X", and click OK;
6. A confirmation window will pop up at this time. Save the documents first, then close the program, and then press the "OK" button in the confirmation window.
7. You can see that the icon of disk J has been restored, and the drive letter of disk J has also become the drive letter of X.
In addition, if you feel that the X disk is very awkward, you can reopen the computer management and change the X disk letter back to the j disk letter. After changing back to the j disk, it will not change back to the U disk icon.
Related reading: computer common fault analysis skills
1. Generally, more than 80% of computer system faults are software faults. At the same time, most software faults are relatively easy to deal with, while most hardware faults are caused by peripherals. Therefore, the analysis and fault finding should be carried out in the order of "software before hardware, external before internal".
2. Common software faults.
A. error prompt: in case of software failure, many errors can be captured by the application software or operating system and give corresponding prompts. Such failures are generally caused by software defects, software conflicts, improper configuration or wrong operation.
B. application software fails to start normally: such failures are generally caused by software conflict, wrong operation, improper configuration or virus.
3. Handling methods of common software faults.
A. use anti-virus software: in case of inexplicable slow down or error of the system or application, scan the whole system with anti-virus software to determine whether the system is poisoned.
B. single application system failure: for single application system failure, the application is generally reinstalled. If you are familiar with the system, you can check the system configuration first and then decide whether to reinstall the system
4. Causes and treatment methods of common hardware faults.
The causes of computer hardware failure are mainly related to the use environment, users' operation habits, natural aging of hardware and poor quality of hardware products. Under normal circumstances, the hardware failure of the system can be eliminated as long as the faulty hardware equipment is found and replaced.
5. When the computer system has a fault, first confirm the fault phenomenon through observation and inspection, then analyze the fault phenomenon, judge the possible cause of the fault of the computer system according to the corresponding relationship between these fault phenomena and possible causes, and then use the troubleshooting method to eliminate the impossible fault causes, so as to gradually determine the fault causes. When the fault causes are determined, Then start the maintenance.
6. The above contents involve relevant computer knowledge. If non professionals suggest to find enough experience before actual operation, some complex computer faults need to be repaired by professional maintenance points and professional maintenance personnel.