After buying a new computer, you will naturally transfer the data of the old computer, but how to transfer the data up to hundreds of gigabytes or more quickly and safely? There are different methods for different situations. Let me have a look with you.
The day before yesterday, someone asked how to copy the data of the old computer to the new computer after replacing the new computer. It's not difficult for people who are a little familiar with the computer, but there will still be some problems for Xiaobai, and through this problem, we can expand Xiaobai's understanding of the computer, because there are many methods, which are described in turn below.
Method 1: directly connect the old computer hard disk to the new computer at the same time, and then copy the things of the old hard disk to the new computer hard disk. (this method is recommended for large number of files)
This situation is suitable for desktop computers. It will be explained at the back of the notebook. After entering the system, the two hard disks see different partitions. You need to be familiar with the data in the previous partition, and then copy it.
Method 2: through U disk or mobile hard disk
USB flash disk is usually 16g, 32g and 64g, so the amount of data copied is limited. If there is not much data to be transferred, it can be transferred through USB flash disk. However, most mobile hard disks start from 500g, so mobile hard disks can still transfer a lot of files, but the cost is high. If they are not used for other purposes, they are not likely to buy a mobile hard disk to transfer data.
Method 3: share through the network
This situation requires that both computers can operate normally and can access the Internet. Usually, two computers are also in a LAN, so only one computer can be shared and the other computer can be copied.
If the new computer is copied from the old computer, set the folder sharing of the old computer, and then access it in the new computer by starting, running, and entering \ \ the IP address of the old computer.
If the old computer is copied to the new computer, set a folder of the new computer to be fully shared, and then access it from the old computer by starting, running, and entering \ \ the IP address of the new computer, and then copy the data into it.
Method 4: through the Internet, for example:
1. Email
2. QQ sending
3. Upload and download various online disks
These methods are suitable for small files, and may be used in some specific cases. When there are the first three methods, there is no need to use the fourth method.
Method 5: mobile hard disk box method
This method is more suitable for notebooks, especially if one of the computers is broken. If more hard disks buy a mobile hard disk box, the cost of tens of dollars can be used as a mobile hard disk. Similar hard disk box solutions include the following:
The cost of this kind of equipment is not high. Some can support desktop hard disk and notebook hard disk at the same time, which is convenient to disassemble. This scheme can be considered when there are multiple hard disks.